Fittings
Forged Fittings
Forged Fittings are supplied for industrial assemblies where dimensional accuracy, material traceability and corrosion resistance matter. Stellex Overseas offers project-based sourcing with standard and custom size support.
Specification Table
| Size Range | M3 to M100 / 1/8 inch to 4 inch as applicable |
|---|---|
| Dimensions | Metric and imperial sizes, project drawing dimensions available |
| Standards | ASME B16.9, B16.11, MSS-SP, EN |
| Types | Elbow Fittings, Tee Fittings, Reducer Fittings, Forged Fittings |
| Length | Standard, cut length and custom length |
| Finish | Black, bright, pickled, polished, galvanized, PTFE or zinc coated as applicable |
| Testing | MTC, PMI, hardness, tensile and third party inspection on request |
Material Grades
ASTM A403 WP304 / WP316ASTM A234 WPBDuplex S31803Super Duplex S32750Nickel Alloy 625Carbon Steel
Applications
Oil and gas plants
Chemical processing
Marine and shipbuilding
Power generation
Construction and fabrication
Water treatment systems
Technical Information
Chemical Composition
| Grade | C | Cr | Ni | Mo |
|---|---|---|---|---|
| SS 304 | 0.08 max | 18-20 | 8-10.5 | - |
| SS 316 | 0.08 max | 16-18 | 10-14 | 2-3 |
| Duplex 2205 | 0.03 max | 21-23 | 4.5-6.5 | 2.5-3.5 |
Mechanical Properties
| Grade | Tensile | Yield | Elongation |
|---|---|---|---|
| SS 304 | 515 MPa min | 205 MPa min | 40% min |
| SS 316 | 515 MPa min | 205 MPa min | 40% min |
| Duplex 2205 | 620 MPa min | 450 MPa min | 25% min |